Congatec conga-IGX Guía de usuario Pagina 68
- Pagina / 134
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Copyright © 2014 congatec AG IGX1m02 68/134
Your selection is only valid for the current system boot. At the next system
boot, the settings in the Boot menu are valid again.
► If you want to start the BIOS Setup, use the cursor keys
or
to select the
Enter Setup entry and conrm your selection with the
Enter
k e y.
15.1.2 If you wish to boot immediately from LAN
► Press the function key
F 11
if you wish to boot directly via LAN and not from the drive which
is given as the rst position under Boot
Option Priorities in the Boot menu.
15.2 Navigating BIOS Setup
or cursor keys
Select menu from menu bar
or cursor keys
Select eld - selected eld is highlighted
Enter or ESC keys
Open submenu (marked by ►) Enter and leave ESC
+ or - keys (numeric keypad=
Change entry for eld
F2 function key
Set default entries for all menus
F3 function key
Reset entries that were in use when BIOS Setup was opened
15.3 Exiting BIOS Setup
► Select the Save & Exit menu from the menu bar to end BIOS Setup.
You can then decide whether you want to save the changed settings.
► Select the required option.
► Press the Enter key.
- User’s Guide 1
- Revision 0.2 (Preliminary) 1
- Revision History 2
- Disclaimer 3
- Intended Audience 3
- Lead-Free Designs (RoHS) 3
- Copyright Notice 4
- Trademarks 4
- Warranty 5
- Certication 5
- Technical Support 6
- Terminology 6
- Contents 7
- 1 Safety Instructions 12
- 2 System Memory Conguration 13
- 3 Feature Overview conga-IGX 14
- 3.2 Block Diagram 15
- 3.3 USB Structure 16
- 3.4 conga-IGX Variants 17
- 3.6 Onboard Components 19
- Backplate 20
- Caution 21
- (SATA connectors) 22
- 5 Display Options 23
- Backlight Inverter 24
- Integrated Backlight 24
- 5.3 LVDS Connector details 25
- DC DVI-I DisplayPort 26
- COM1 COM2 26
- LVDS Mode: 29
- (LVDS tool) 29
- 5.6 LVDS Tool 32
- 5.7 LVDS Cabling Reference 33
- 5.8 Dual-DVI Output 34
- 5.9 VGA Output 35
- 5.10 DVI or VGA plus LVDS 36
- 6.4 Drive Power Connector 41
- Drive Power 42
- Front Panel 42
- 7 Internal Connectors 43
- 7.2 Internal USB 2.0 Ports 44
- 7.3 Internal USB 3.0 Ports 45
- High Denition Audio: 46
- Legacy Audio (AC97): 46
- 7.6 m-SATA / SATA 47
- 7.7 Mini-PCIe Connector 48
- PCIe x4 (Gen2) 49
- 7.11 Intrusion Connector 50
- 7.12 Fan Connector 51
- 7.13 Front Panel Connector 52
- 8 System Monitoring 53
- 8.2 conga-IGX Sensors 54
- 8.3 SilentFanCongManager 55
- 9 Power Consumption 58
- 10 Operating System Support 59
- 11 conga-IGX Tools 60
- 12 Miscellaneous 61
- OS Watchdog 62
- 13.2 Graphics Memory 63
- 13.3 AMD “Eyenity” Support 63
- 13.4 HDMI Audio Support 63
- 14 Introduction 65
- 15 Navigating BIOS Setup 67
- 15.2 Navigating BIOS Setup 68
- 15.3 Exiting BIOS Setup 68
- Main Menu – System functions 69
- 16.1.3 Processor Details 70
- 16.1.4 Memory MemoDetails 70
- 16.2 System Language 71
- 16.3 System Date/System Time 71
- 16.4 Access Level 71
- 17.1.1 TPM Support 73
- 17.1.2 TPM State 73
- 17.1.3 Pending TPM operation 73
- 17.2 SATA Conguration 74
- 17.3 Graphics Conguration 75
- 17.4 LVDS Conguration 75
- 17.4.1 LVDS Support 76
- 17.4.3 Non-EDID Support 76
- 17.4.4 LVDS Mode 76
- 17.4.5 LVDS Channel Swap 77
- 17.5 USB Conguration 78
- 17.6 USB Port Security 79
- 17.7 System Monitoring 80
- 17.7.3 Chassis Type 81
- 17.7.4 TCV Version 81
- 17.7.5 Fan Control 81
- 17.7.6 Fan2 Wiring 82
- 17.8.1 Audio Conguration 82
- 17.9 Super IO Conguration 83
- 17.10.2 Device Settings 84
- 17.10.3 Change Settings 84
- 17.11.1 Serial Port 85
- 17.11.2 Device Settings 85
- 17.11.3 Change Settings 85
- 17.12.1 Parallel Port 86
- 17.12.2 Device Settings 86
- 17.12.3 Change Settings 86
- 17.12.4 Device Mode 86
- 17.13 Network Stack 87
- 18.1 Password Description 88
- 18.2 Administrator Password 89
- 18.3 User Password 89
- 18.4 User Password on Boot 90
- 18.5 Cabinet Monitoring 90
- 18.6 Skip Password on WOL 90
- 18.7 FLASH Write 90
- 18.8 Secure Boot 91
- 18.8.4 Secure Boot Mode 92
- 18.8.5 Key Management 92
- Append Var to DB 94
- 18.10 HDD n / HDD-ID 95
- 19.1 Power Settings 97
- 19.1.2 Power On Source 98
- 19.1.3 Low Power Soft Off 98
- 19.2 Wake-Up Resources 99
- 19.2.8 Wake Up Day 101
- 19.2.9 USB Keyboard 101
- Display of the Event Log 102
- 20.1.6 METW 103
- 20.1.2 Erase Event Log 103
- 20.1.3 When Log is full 103
- 20.1.4 Log System Boot Event 103
- 20.1.5 MECI 103
- 20.1.7 Log OEM Codes 104
- 20.1.8 Convert OEM codes 104
- 20.1.9 View SMBIOS Event Log 104
- 21 Boot Menu – System boot 105
- 21.1 Boot Conguration 106
- 21.1.3 Fast On 107
- 21.1.4 USB Support 107
- 21.1.5 PS2 Devices Support 108
- 21.1.6 POST Errors 108
- 21.1.8 Boot Removable Media 108
- 21.1.9 Virus Warning 109
- 21.1.10 Prefer USB Boot 109
- 21.1.12 CSM Conguration 110
- 22.1 Save Changes and Exit 112
- 22.3 Save Changes and Reset 113
- 22.5 Save Options 113
- 22.6 Boot Override 114
- 23 BIOS Update 115
- Signal Symbol Pin Pin Symbol 117
- 24.1.2 Inverter Cable Plan 118
- Signal Symbol Pin Pin Symbol 119
- Pin Signal Name Description 119
- 24.2.2 Inverter Cable Plan 120
- Pin Signal Name Description 121
- 24.3.2 Inverter Cable Plan 122
- 24.4.2 Inverter Cable Plan 124
- 24.5.2 Inverter Cable Plan 126
- 24.6.3 Inverter Cable Plan 128
- 24.7.2 Inverter Cable Plan 130
- 24.8.2 Inverter Cable Plan 132
- 24.9.2 Inverter Cable Plan 134
Relacionado con productos y manuales para Barebones Pc / Estación De Trabajo Congatec conga-IGX
(25 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.023 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales